Most people believe that changing a faucet is a difficult task for which you must hire a plumber and pay him. This may be true for some people who don’t really know how their fixtures are assembled. This article, on the other hand, will show you how to replace your kitchen faucet without the assistance of a professional.

You might need only about 15-20 minutes to finish it. All you have to do is read the instructions below carefully before starting the process so that you won’t miss any step.

Tools needed:

> Bleach for cleaning old faucet parts. You can use shampoo or soap if you want to prevent possible corrosion.

> Rubber gloves to avoid dust contamination.

> Plastic bags, newspaper, or any other disposable material to protect your furniture during the process. This is essential because you’ll need to work around the surface of the cabinet, which is made of plastic or stainless steel. The cleaner will find it tough to clean because there are no wooden surfaces for it to cling onto, so you will have to make sure that everything stays clean and dry before you start working on them again.

> A bucket with water to help you clean the area.

> A pair of pliers or adjustable wrench will be helpful for you to shut off the water supply. It’s important to remember that you’ll be working with hot water, so make sure you are protected by gloves, long-sleeved shirt, and pants.

If you need any tool that is not on this list, just go ahead and pick it up before starting the process. The tools above are mostly used for cleaning because some of your old faucet parts might be corroded or rusted. Use rubber gloves to protect your hands from dust contamination during this time as well.

Step 1: Shut off your water supply.

The first step is to shut off the water supply to your kitchen sink. Turn the best kitchen faucet on slightly to identify which one is the hot water valve and use a screwdriver or wrench to turn it off after you have identified it. But remember to close it again after turning the water supply off because you might have forgotten something that needs to be done before you can proceed with the process.

After shutting down the water supply, you may now proceed with cleaning your old faucet parts for being replaced. Wear rubber gloves so that you will not get contaminated by moldy or rusty parts of your faucet.

Step 2: Remove old faucet parts.

Remove the old faucet parts from the spout, handle, valve, drain assembly and water supply lines. Dispose of them in a plastic bag for proper disposal. If you are planning to replace the cartridge or cartridge assembly, then take note that this part cannot be used again. If you have other parts that are corroded or rusted, then soak them in bleach solution for at least 30 minutes before cleaning since this type of material is difficult to clean without chemicals.

Step 3: Clean old faucet parts.

After removing all of the old faucet parts, place them on a newspaper or plastic bag to dry. Clean them with the bucket you have prepared after shutting down the water supply, using soap or shampoo. Cleaning them with rubber gloves will help you avoid contamination since there are no wood surfaces around which can act as an absorbent.

Step 4: Put on new kitchen faucet parts.

Put your new faucet parts back in place by following the instructions on its packaging, but it is easy enough for anyone to do this by simply tightening some nuts and screws that are already attached to their corresponding sections of your new parts. You may need a plumber to help you if there are some instructions that you don’t understand.

Step 5: Flush the system.

Now that all the water supply lines and faucet parts of your kitchen faucet are securely in place, you can now flush the system by turning on the water supply again and holding the new faucet with your hand to let it run for a few seconds before stopping it. This will ensure that there is no remaining water in your pipes and any loose parts of your pipes will be tightened once again.

Step 6: Turn on the water supply.

After you have flushed all of your pipes, turn on the water supply again and try using your new faucet. Make sure it works well without any leakage because if there is a leak, you have to tighten some nuts and screws again because they might have been displaced during the installation process. If everything is working fine, then go ahead and put back all of your old faucet parts inside a plastic bag once again for proper disposal.

Make sure that they are properly cleaned because you don’t want to contaminate your kitchen sink or possible kitchen sink cracks after installing a new faucet.
Through reading the instructions above, you should be able to change your kitchen faucet without any problem. Just make sure that you read every step of this article carefully so that you won’t miss anything that can help you finish the process even faster.

Also, don’t forget to turn off your water supply after working on it because there may be different types of water valves in your kitchen sink depending on the age of your kitchen. If not, then just shut down the valve before start working on it so that everything will stay clean and dry while you are cleaning it before putting it back together again.

What Are the Functions of Kitchen Faucets?

The way kitchen faucets are used has a big impact on the overall look of the kitchen. Many people are unaware of the several types of kitchen faucets available. Single-handle, double-handle, and multi-handle Kitchen faucets, sprayers, and pull-down Kitchen faucets are available in a range of finishes, including stainless steel, chrome, brass, and other materials. As a result, there are numerous options accessible at both the local home improvement store and on the Internet. It is a good idea to look around at some of the possibilities before purchasing kitchen faucets to determine which one best meets your needs.

Kitchen faucets with a single handle are simple to use and just take one turn of the handle to change the water temperature. These kitchen faucets feature a wide diameter and tall spout with a single, free-standing straight arm. The ability to modify the temperature control with the same handle is a frequent feature on these types, making them easy to use with a wide range of built-in and removable sink and Kitchen faucet attachments. Furthermore, because of the wide swing arm, it can be placed near a corner or over a counter where a wall outlet is not readily available. This type has the advantage of allowing you to change the water temperature without having to get up and take your hands off the handle. The difficulty of cleaning the spout after use, however, limits the single-handled design.

Kitchen faucets with two handles are designed to be used with the sink or over the counter. They have two arms, one that hangs over the counter and the other that hangs below the handle of the kitchen faucet. These handles are usually made of plastic and feature a different gripping mechanism than the single-handed type. These handles tend to become covered with food residue over time due to the larger amount of contact between the spout and the counter.

Sprayer kitchen faucets come with handles that can be used on sinks or on the counter. Although some versions feature two handles, the majority only have one. A sprayer kitchen faucet has two handles that allow the user to spray water in both directions at the same time. Single-handle kitchen faucets usually have only one nozzle, requiring the user to turn the handle clockwise to begin spraying water. Some sprayer handles come with a shower attachment, which is beneficial if your sink lacks a separate spray unit. Some recent kinds of single-handle kitchen faucets include a trigger built into the handle, allowing the user to manually activate the spray.

The most typical use of a kitchen faucet is to pour a cup of water. Single-handle kitchen faucets with a separate spray unit are frequently used in conjunction with a cold water supply. When combined with the independent spray unit, the user has complete control over the amount of cold water that enters the sink. To make this operation easier, a separate valve is used to disconnect the hot water supply from the sprayer nozzle.

Under counter or under mount Kitchen faucets units are kitchen faucets that are meant to fit onto a countertop. The pump in these kitchen fixtures is usually powered by a little amount of water, and they can either come with their own plumbing or be readily attached to an existing sink via a drain hole. Undermount kitchen faucets typically have a flat face and supply a single flow direction, either hot or cold water. The water drains from the countertop’s center toward the sink, ensuring a more uniform flow. They may also include an adjustable water temperature control that allows the user to alter the temperature of the water, which is useful for those who want to regulate the temperature of their sinks.

An isolated handle refers to a kitchen fixture with a separate Kitchen faucets handle. When only one person will use the fixture, such as when washing fresh eggs in the kitchen sink, a separate handle is employed. Each each handle is referred to as a distinct handle in this scenario. It’s crucial to figure out how many handles you’ll need for your sink so that you can reach the whole set of kitchen faucets without rotating the handle. Varying handle designs give different gripping surfaces, thus depending on how much work the user will be performing, it’s crucial to choose the handles that are most comfortable for them.

Kitchen faucets for pots and pans come in a variety of styles. Pots and pans all contain some form of spout or opening on their surface, however, there are numerous variants on the fundamental design. The type of water that can come through the spout, whether it’s a downspout or a spray handle, is normally controlled by the opening. Some kitchen faucet designs allow the cook to change the spray level and angle, which is useful when using a smaller pan to cook tiny foods or preparing a dinner for a small group of people.

Conclusion

Faucets are an important component of every kitchen. Pull-out, side sprayer, and single hole mount are the three most prevalent styles. The pull-out faucet is ideal for washing dishes or filling pots with water, while the side sprayer delivers a more direct stream to tackle stubborn messes like baked-on food in a frying pan. Single hole mounts save space by removing the need for additional holes in your countertop; they also make it simple to fill large pots without having to return to the sink many times. With so many choices nowadays, you’re likely to discover one that meets both your demands and your budget!

Give a Comment